I should start by saying I have only had it running on Win2K & WinXP workstation and Win2K3 Server, I did have problems with Win2K server, but I think that was due multiple network cards.

1st you will need to add NWLink IPX/SPX protocol into you network settings

2. You will need to provide a network number in HEX, I simply convert my IP number into HEX (eg 192.168.0.1 would be C0A80001).
You will also need to pick a frame type, this must be the same as the frame type used on you TBBS system (not documented here,
indicate if you need this information) and it's best to use 803.2 as this seems to work best with TIPX.

3. Now all you need to do is run TIAD, there are some command line switches as follows
-p <port #> change the port number to use
-d debug mode
-a <ip #> IP address to bind to.

4. if every thing is set up ok, then the TBBS last SAP: should change to cyan and have the date/time of the last SAP packet
and you should be able to telnet into your bbs.